Patterned Vinyl and HTV Sheets - Buffalo Bills Tie Dye (TD4)

Our patterned vinyl's are available in heat transfer vinyl (HTV), matte (permanent) outdoor vinyl, gloss (permanent) outdoor vinyl and matte (removable) indoor vinyl. Our HTV is perfect for shirts, pillows, etc. and will make your latest project stand out.

Permanent outdoor vinyl in matte or gloss is the best choice for decorating items like cups or making decals. The matte removable indoor vinyl is the best choice for walls or smooth surfaces where you would want temporary adhesion that comes off easily. We only use top quality materials and equipment. The 6x12 inch option will be half of the 12x12 inch image shown.

Heat transfer vinyl (HTV)
1-FREE SHEET of Heat Transfer Tape is included with each order/package, to get you started!! 3-4 uses per sheet is possible.  Additional sheets of Heat Transfer Tape are available for purchase.
**Please be aware that this type of heat transfer vinyl does not come with application tape/carrier pre-applied by the manufacturer due to how it is created,  BUT IS REQUIRED to move the vinyl once cut, to your fabric/substrate.   If you need ADDITIONAL heat transfer application tape, it can be found by searching HTV Transfer Tape, on our site.

Read below for heat transfer application instructions. Our HTV is suitable for Cotton, polyester, acrylic and similar fibers. Our HTV carry the Oeko-tex label, which certifies that our products are compliant with international health and safety regulations within the standard class tests of 100. This certifies that these products are safe for use on apparel for infants and children. As such, they also meet the standards specified by the CPSIA.

Matte or gloss outdoor vinyl- Use for decals, glass, plastic, smooth surfaces. Permanent adhesive. Top quality printed outdoor 3 mil vinyl with permanent adhesive. Adhesive 3 mil DOES NOT STICK TO SOME SILICONE OR RUBBERIZED FINISHES. Take care when applying by using a transfer tape. Do not rub directly on the vinyl when applying. It may scratch. DO NOT USE 3 MIL VINYL ON WALLS. 3 mil with 90# liner
indoor/5 year outdoor vinyl … weatherproof, waterproof

Matte indoor vinyl – Wall vinyl or smooth surfaces for temporary decoration. Removable adhesive.  6 mil matte indoor wall vinyl perfect for temporary decoration, walls, glass, painted surfaces and more. DO NOT APPLY TO FRESHLY PAINTED SURFACES. May not work with some textured walls. Apply with transfer tape. Do not squeegee without transfer tape or vinyl may scratch.

Directions for HTV****
***Test on scrap fabric or in an inconspicuous area first to figure out your needed time and iron settings since all irons/presses are different. Shop policies apply.

Heat press- Cut pattern side and weed excess material. Apply heat transfer tape to top of design (not included), squeegee, remove backing and place on garment. Heat press at 320 degrees for 18 seconds with medium to heavy pressure. Peel transfer tape hot within 5 seconds.
DIRECTIONS FOR IRON-
Cut pattern/color side (not in reverse). Weed excess material. Apply heat transfer tape to the top of the design (not included), squeegee, remove backing and place on garment.
PLACE PARCHMENT PAPER OR TEFLON SHEET on top of vinyl and tape. If you do not use parchment paper or teflon, the vinyl will melt.
Turn iron onto low to medium low heat. Start with 10 seconds with even downward pressure and add an additional 5 seconds as needed. Try to avoid moving the iron. When the pattern of the fabric threads and the edges are attached, the vinyl is properly adhered.

We only use full color high quality EcoSolvent inks. Vinyls are not reusable.
Due to variations in screens and monitors colors in images are only for reference. Image size is altered by screen size as well. The image you see will be expanded to 12x12 inches. Longer lengths will repeat seamlessly when possible. 

We do not refund for user error including but not limited to not following instructions, melting HTV and using improper transfer tape. If this is the first time you are using our vinyl and/or you are using an iron to apply HTV the customer needs to do a test cut and test pressing first with small or scrap pieces until the desired results are achieved. We do not recommend making a full design with the vinyl until you have familiarized yourself with it using your equipment. We include a link to full instructions in the package but if you have questions, we are always happy to help. Instructions are meant to be used as guidelines due to variations in heat presses, cutters and irons.

**WATERMARKS FOR SECURITY PURPOSES ONLY.  WATERMARKS ARE REMOVED FROM PRINTED PRODUCT.